May 7, 2023
Description
This is a remix of the Hyperpixel 4.0 Pi 4 Case by superwoodle. My remix contains a mounting adapter wich can be screwed into a enclosure wall e.g. LACK with up to 3 countersunk screws with a diameter of max. 3,5mm. The case has been modified to be fitted to the mounting adapter with a 10mm M3 screw and one M3 nut.
No supports needed, print the mounting adapter upright on the narrow flat side, the case on the flat bottom.
You can use the mount on the right side of the enclosure or up-side down on the left side.
STEP and Fusion360 files are provided.
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament: Prusament PLA Galaxy Black
Notes:
No supports needed, print the mounting adapter upright on the narrow flat side, the case on the flat bottom.
License:
Creative Commons — Attribution
7
AirFelix
