August 22, 2024
Description
Update 22 August 2024 for bottle neck between 20mm and 32mm.
Hi !
I created this very stable funnel adapted to the handling of resins and more particularly the use of paper filters such as this one:
https://s.click.aliexpress.com/e/_DClElrL
The lugs on the inside are used to prevent the paper filter from sticking against the funnel and the resin to go back on the inside of the funnel by capillarity.
This makes it possible not to dirty excessively the funnel and thus to save resin.
The bottom end toothed profile allows the resin to be easily squeezed into the bottle, thus saving the maximum amount of resin.
Shrink the file in your slicer in order to adapt the funnel to the bottles you have.
2 versions availlable : 45 and 60° adapted to the paper filter size
For VAT Film -> USE RAIN-X ! It's a great improvement...
You may also be interested by theses topics :
How to calibrate your exposure time : https://github.com/altLab/photon-resin-calibration?fbclid=IwAR06rlwNx4kWLCfTfY1CANumRgU0ohte1M7undZWjIbRVAB_O0DPgniykX8
Happy printing !
Category: 3D Printer Accessories
License:
Creative Commons — Attribution — Noncommercial
7
Renba
