Média Storage for Commodore Amiga

This is my cards rack for Commodore Amiga computer.

This rack can be used on differents shelf tickness.
It containt 6 floppy disks, 2 SD Cards, 2 Compactflash cards, 2 PCMCIA Compactflash adapters and 1 PCMCIA wifi card.

I join from T12 to T25mm models depending of your tickness shelf.

Slicing parameters i have used :
Process 1 (from bottom to 85.80 mm height) :
Layer 0.2
Use Skirt
Infill 15%
Support rectilinear or grid
Appropriate temp & cooling for PLA or PETG depending of your machine
Speed 80mm/s max (for process 1 only)

Process 2 (from 85.80mm to top height :
Layer 0.1
Infill 15%
Appropriate temp & cooling for PLA or PETG depending of your machine
Speed 30mm/s max (for last top layer and letters & logo finishing)
if necessary, slightly increase the retraction for a better result with the letters and the logo.

and at the end a little bit of painting colors