DE Safety Razor

Please note: For structural integrity, print the head cap on its side. Supports are not needed. If you have trouble with it not sticking to the bed, use a raft.

This is a two-piece safety razor for use with double-edge blades. Post-processing requires breaking away the supports on the blade guards. The tolerances vary from printer to printer, so, before loading the blade, make sure that the cap has a firm fit and doesn't require a lot of effort to slide on and off. To load: Place the blade on the cap first, then insert the cap on the razor off-center, and then slide in place. Please post your makes. Enjoy

12/04/2020 Update:

Three new caps with different levels of aggressiveness have been added. Results vary from printer to printer, so use the cap that works best for you. Caps are marked as follows: 1 Dot = Mild, 2 Dots = Mormal, and 3 Dots = Aggressive.

Print Settings

Printer Brand:

Anycubic

Printer: 

Semi-closed 4Max

Rafts:

No

Supports: 

No

Resolution:

0.1

Infill: 

100%

Filament: 3D Salutech PLA Gold and Carbon Fiber

Category: Bathroom