Print-in-place tissue box with magnetic lock

This is the tissue box 120x120x120 I made to be one-shot printed with no support.

I used a hinge that doesn't need screws and bolts.
(thanks to https://www.printables.com/it/model/307580-parametric-hinge)

The box remains lock with two magnets that are inserted into their slots.  

I hope you like it and if you have any suggestions or requests I will do my best to make them happen.

Now 3 patterns are available: honeycomb, cube, and triangle

Enjoy!
 

Printing
 

• Material: PLA
• Layer: 0.2mm
• Infill: 15%
• Supports: NO

Parts needed

• 2 x 10x3mm magnets

Updates

• v2.1 - fix box dimensions to 250*130*60 and set hinge knuckle count from 3 to 5
• v2.0 - added 230*115*55 box 
• v1.5 - added honeycomb front side and back side
   

Are other versions available?

If you like the model, but you have different sized magnets, like and comment. I will do my best to add all the suitable sizes.

Stay in touch!!!