Nerf Caliburn Pic Rail Talon Clip

I don't want to use a belt, so I made a mag holder for talons on my Caliburn! It prints a bit loose, so change your slicer and adjust the scale just a bit (like 0.5-1%) to accommodate. Should be a friction fit for both mounting to the blaster and the magazine itself. I used electrical tape to give a bit of friction, but different printers will print differently.

I am still updating this, so if you have feedback, let me know! Enjoy!

UPDATE: 7/13/2020 - Made the two holes that were designed for 6-32 Screws. Also added a raised ridge on the bottom support for the mag, allowing a tighter fit.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

0.2-0.8

Infill:

Filament: Hatchbox PLA Black

Category: Sport & Outdoors