Sneezy quotes tissue box cover

A simple, easy to print sneezy quotes tissue box cover with embossed/recessed design.

The tissue box cover has been designed to fit most tissue boxes, it has an internal dimension of 140mm x 140mm x 140mm so should accommodate Kleenex, Puffs and Scotties tissue boxes along with any other boxes that are within 5.5 inch width, height or depth.

2 designs available... one with a sliding base cover and one without a base cover if you would prefer.
The design with a base cover slot has been designed with a discrete notch to help "lock" the base cover plate in place.

You can even print this cover in multiple colours so that the top of the cover is different to the sides. Just add a colour change at your preferred layer in your slicer when slicing.

Put your own spin on the top or base cover by turning off top and bottom layers in your slicer and adjust your infill pattern, percentage and angle to create a unique bespoke top surface or base for your tissue box cover. (See photos for a few examples).

If you are lucky enough to own an MMU or similar printer you could even print the recesses in a different colour to the rest of the walls. One day I hope to own a Prusa and join the MMU club!

Recommended printing height is 0.2mm but should print perfectly fine at other layer heights too.
Recommended extrusion width is 0.45mm.
If you print the base cover with no top or bottom layers be sure to use at least 3 or more perimeters for better structural stability.

Supports should not be required as overhangs are designed to be minimal to avoid the need for support structure. Designed with thin but stable walls so that the cover is not too heavy but sturdy enough for constant use and should also help speed up print time.