Cupcakes, I choose you!!
to get in my mouth
Bulbasaur, Charmander, and Squirtle cupcake toppers that can also be used to top… whatever your heart desires. Lightweight and only a little fragile.
Kid is having a Pokemon birthday party this weekend and the toppers you can buy either had too many or had a bunch of Pokemon he didn't want to look at.
Printing Experience:
- Recommend 0.3mm nozzle or smaller
- Solid part prints at up to 1.75mm high, then the details print up to 3mm high
- I paused the print and switched filament to black to make my spouse happy; do as you see fit
- I slowed down to 75% speed for this so as to ensure better details
- The details on the Charmander are finer than the Bulbasaur because I couldn't find 3 pictures from the same source that worked for my needs
- I was able to print 15 at a time on my Ender 5 plus, taking 10-11hrs each time
- Make sure your bed is as close to true level as you can possibly get, as these will take up every square mm and will be sensitive to imperfections
- Recommend putting in the freezer for an hour before scraping off the plate, I only had one break and it was when I got impatient with the freezer
- I didn't print Squirtle because my kid only cares about the other two for some reason but I didn't feel right making only 2 of the 3 iconic starter Pokemon so here you go
- I cannot speak to Squirtle's printing experience for this reason
thebrownwelsh
