Bowling Trophy

1. printing
2. sanding with sand paper
3. spraying with filler
4. wet sanding with sand paper
5. painting
6. bonding together, All parts I glued together with Z-POXY (resin glue)
7. varnishing

For better feel of the weight, is filled with gypsum

Printin time about 40 hours with 0.2

Weight about 1,5Kg

Hight 366mm

Bottom stand: Infill 20%, No supports and next infill abouth 100g gypsum,

Main stand: print whitout bottom and infill 5%, No supports and next infill abouth 900g gypsum

Pin: infill 30%, No supports

Ball: infill 30%, Yes supports

Medail: infill 20% No supports

Words: infill 100%, No supports

Print Settings

Printer:

Micromake D1

Rafts:

Supports:

Yes

Resolution:

Infill:

5-30%

Category: Sculptures