Samsung T7 to T5 mount adapter

I created this model because the T5 SSDs are now discontinued making them difficult to find. My Blackmagic pocket cinema 6k Pro cage has a built-in mount for the T5 SSDs. The camera cage is made by smallrig.

The T7 is slightly smaller, so the clamps wouldn't work. This makes the T7 SSD roughly the same size as the T5 so they will work with clamp-style mounts.

There is also a small cut out in the bottom to see the SSD capacity marking.

Printed on my AnkerMake M5 using the following settings:

Overture PLA+

Nozzle start temp: 225c

Nozzle main temp: 210c

Heatbed: 60c

Infill: 100%

Layer height: 0.2mm

Nozzle size: 0.4mm

Fan speed: 40%

Plate adhesion: brim

It took roughly 45 minutes to print.