May 19, 2023
Description
Prusa LED Holder.
You will need a small led strip and an aluminum L-bracket.
The led strip has to work at 24V. The aluminum L-bracket is 1.5mm thick.
Paint the outside of the aluminum black.
Stick the led strip with cable to the aluminum.
Connect to 24V direct through a 2A fuse.
Soporte LED Prusa.
Se necesitan una pequeña tira de led y un soporte en L de aluminio.
La tira led tiene que funcionar a 24V. El soporte en L de aluminio mide de grosor 1,5mm.
Pintar de negro la parte exterior del aluminio.
Pegar la tira de led con cable al aluminio.
Conectar a 24V directo a través de un fusible de 2A.
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.15
Infill:
20
Filament: Starfil PLA Orange
Notes:
Prusa LED Holder.
You will need a small led strip and an aluminum l-bracket.
The led strip has to work at 24V. The aluminum l-bracket is 1.5mm thick.
Paint the outside of the aluminum black.
Stick the led strip with cable to the aluminum.
Connect to 24V direct through a 2A fuse.
Soporte LED Prusa.
Se necesitan una pequeña tira de led y un soporte en l de aluminio.
La tira led tiene que funcionar a 24V. El soporte en l de aluminio mide de grosor 1,5mm.
Pintar de negro la parte exterior del aluminio.
Pegar la tira de led con cable al aluminio.
Conectar a 24V directo a través de un fusible de 2A.
License:
Creative Commons — Public Domain
7
LuisFer
