Tremor Chassis Scx24

DEPRECIATED
UPDATED MODEL: https://www.printables.com/model/484851-tremor-chassis-v2-for-scx24

This is a chassis for the SCX24 that I designed and 3D printed. It is a low CG-style chassis / Comp chassis. 

I designed this with a brushed motor and stock trans in mind. Aftermarket transmissions/ larger motors may not fit as is. Im counting on the community to remix this design to fit other combinations (furitek brushless, etc). 

I included a F360 file to make remixing easy. 

PRINT SETTINGS: 

I recommend printing the hood, top, and rear mount vertically using brim ears. Battery Tray should be printed with the flat side down. Skidplate should be printed flat side down.

The left and right halves of the chassis on either side with no supports for the recessed holes. I used a trick to print small bridges instead of one flat side.