REFRIGERATOR WINE RACK

This is a really simple print that needs no support.  

Thanks to input from Printables user faqiu who suggested making a shorter version, I have uploaded two alternative sizes to the original 240mm long model - 200 and 160 mm.   

I use the longer one as it suits our shelf size best, the mid sized will be the most adaptable, the shorter one will easily fit a  standard wine bottle but might be less convenient in use. (I have not tested this version so user comments will be appreciated)

I've used Prusament Marble Grey PLA with a 0.4 nozzle, but any combination of layer height and nozzle diameter could be used depending on the finish you want to achieve.

Adding some 5mm clear bumpers will give the rack a professional look and make it non-slop on the shelf.  

The appearance of the model can be made even better by ensuring each bumber is positioned in an identical location.

Just print the 10 minute template provided and use it to locate the position of the bumpers as you stick them in place.