Milwuakee M18 Fuel Track saw Arbor Port Dust Cover

Please upload makes - it's how I afford my filament and improve my design!

This Dust Cover is designed to fit the new Milwuakee M18 Fuel Track Saw and prevent dust blowing out of the arbor port.

I designed it to use the saws own allen key to lock it in place. 

To fit:

1. insert end with no keylock onto saw. with the flat section of rotating lock turned outward.
2. once seated in, turn the rotating lock to secure. 
3. Reverse to remove

This item is print in place and seems fine printed for me at 0.2mm, 15% infil using PLA or ASA. 

Prusaslicer will ask about multiple parts - just say yes.

Supports are already marked so please use them and print with the top-side facing up. I know this means more supports underneath but the lock prints better. The small bar over the lock wheel pushes it down when secured and offsets the freedom of movement that print in place design requires.

The side of the Milwuakee saw is bevelled which made designing this a PITA for me as a novice. I'm learning lots and hopefully it's useful for you!

If there are any issues with the fit let me know so I can sort it :)