CZ 75 Grip

This is a grip for a Spyder paintball marker that fits Hogue CZ 75 wrap-around grips. Sometimes called an "86 frame", though those are typically much more vertical (86 degree angle) and usually use CZ 75 grip panels, not wrap-arounds.

Hardware Needed: 10-32 Square Nut x2 8-32 x 3/4" Socket Flat Head Screw x2 8-32 x 5/8" Socket Flat Head Screw x2 8-32 Hex Nut x4 1/4-20 x 3/4" Socket Head Cap Screw x1 1/4 Flat Washer x1 Hogue CZ-75 Screws

You will need to pause the print to insert the 10-32 square nuts into the recesses for mounting the ASA. Print with support. I've included two versions of the .STL, one without support, and one with manually created support. Use whatever works best for you.

The 8-32 flat head screws and nuts reinforce the mounting point and the ASA holes to prevent layer delamination. You will need to use a ball-end hex key or cut down a standard hex key to tighten the 1/4-20 screw to attach the grip.

This grip will only fit on old school Spyder frames that have a removable AR15 style grip. This will not fit on an AR15 due to how the grip fits around the specific features of the Spyder frame. But you may want to use this as inspiration for modifying to fit other things. I've included .STEP files.

Category: Sport & Outdoors