Needle Containers

Someone in a swedish 3D printing group requested a container for her friends ampoules that she uses with her (she has diabetes), so i made two different versions depending on what they decide on using. Its a basic cylinder with a divider and two lids (one for clean and one for dirty ampoules, clearly highlighted by a biohazard logo on the lid) while the compartmentalized one is made to hold 5 ampoules on each side in slots.

The holes in the compartmentalized version is 18x8mm and is made for models similar to the SoloStar 5x3 ml ampoules, if requested i can post a .STEP file to adjust measurements to your liking.

UPDATE: I added a slimmed version with space for 3 ampoules total (still the same model) that goes in a single tube, you have a clean end to indicate the clean ampoules and then you load the bottom with the dirty ampoules (indicated by a biohazard sign on the side and on the lid). You can apparently tell by visual inspection that a ampoule has been used on the container itself.

Print Settings

Printer Brand:

Creality

Printer: 

CR10S PRO

Rafts:

No

Supports: 

Yes

Resolution:

0.2 layer height is maximum

Infill: 

20-25%

Notes:

Most likely needs supports (or VERY GOOD bridging) to be able to print the divider and ampoule holder portion unless you can make it work somehow by printing it on the side.

Category: Gadgets