March 7, 2024
Description
P90 and FS2000 parts
Printing:
All parts should be printed solid. PLA will not work for anything other than the selector switch. Nylon is the recommended material. You need to use a strong impact resistant material. Stay away from carbon or glass fiber filaments due to the aggregate potentially causing excess wear on mating or sear surfaces.
Split hammer requires 2) M5x5 Binding post screws/Chicago screws
Disclaimer: I don't have or have access to these, made for educational purpose only
License:
Creative Commons — Attribution — Noncommercial — Share Alike
11
GonzoStrange
