Handles for skipping rope

Handles for skipping rope with 606 ball bearing.

2 x 606 ball bearing required for each handle (4 in total). The outer bearing is press-fit, the inner one is loos-fit, you can pull it in using the rope itself.

Supports are required for the bearing stopper (on the inside). 

SkippingRopeHandleV2 is a simplified updated version:

• a single bearing is required for each handle
• prints without supports
• no infill required (0%)
• somewhat faster to print

For best results use 4 layer wall thickness. Use a brim for better bed adhesion. 

The 606 bearings have a 6mm hole, so that would be the maximal thickness of the rope.

Please share your design in case you make modifications.