Tissue box holder on tape (F360 parametric)

Tissue Box holder attached with double sided tape

I was tired of holding the box when pulling tissues, so I made a simple attachment that holds it steady on or under the shelf. 

I recommend using command strips, as they can be easily removed when you want to change place of the holder or put it away.

Adjust for your size

Open in Fusion 360 and edit X and Y parameter. Alternatively, you can just scale it in slicer (but wall thickness would differ then). 

Print and use

• PLA is sufficient, you can get fancier material if you want
• Print 2 times - model is symmetrical, so no mirroring is needed.
• Find sufficiently long rubber-band
• Attach to your desired place with command strip or double sided tape.
  • Width for attachment is 16.5mm, length depends on the box size