Easy Print 1:100 Leopard 2A6

This is a remix of https://www.thingiverse.com/thing:4718232

Supplies:

• Superglue
• Blue Tape (optional)

Printing Instructions:

• Use 0.1mm layer height for best results
• Use the .3mf file with custom supports or use build plate supports

Assembly Instructions:

1. Remove all supports
2. Use Pin to help align the parts (optional)
3. Glue Gun Top to Gun Bottom
4. Set the assembled gun into Turret Bottom
   1. Note: apply a small square of blue tape onto the hinges if they are too loose
5. Glue Turret Top to Turret Bottom
6. Carefully glue Roof MG onto the post next to the loader's hatch (see exploded view)
7. Glue Hull Top to Hull Bottom
8. Glue Track L and Track R to the hull
9. Insert the turret into the hull

Areas where supports are necessary (included in Leopard2A6.3mf)

Exploded view