Portafilter Stand (Type 4 - 54mm)

This design allow you to dry and store your Portafilter in an elegant way.

It is easy to clean and avoid any spills.

This is for 54mm Portafilter type 4 with three locking "teeth".

Tested successfully with the Sage portafilter.

All other characteristics are shown on the attached drawing.

You can download the design with my logo on it which I find to be a fun addition.

However, you can download the same design without the logo if you prefer a less apealing look.

Any question or custom design can be ask in DMs.

Have a great day and keep on printin' !

                                 Sea Bison 

Print Settings ==============

Rafts:

Doesn't Matter

Supports: 

No

Resolution:

0.2

Infill: 

15%

Filament: 

PLA

Notes:

PLA works fine.

Can be printed without support (maximum angle 30°)

Use 3 wall loops and 3 Top layers for good strength.

I recommend to use either food grade filament with a dedicated printer or cover your print with food contact varnish in order to avoid contamination.

Category: Kitchen & Dining