Drawer Battery Box AA & AAA + storage for empty batteries

!! ATTENTION

You can't scale the model as the battery size needs to be kept.
I would suggest to do min. 4 top layers as I only used 2 which definitely is not enough as you can see on the pictures.
For the infill I did 8% Grid. You can go up to 10 - 15% if you like.
Print duration would go up to around 6h45min.

######
Hello again.

As I wanted to store my batteries in my table drawer I needed to create a model that would fit with a max height of 4,9cm. So I had to put the AA in a 45° angle. I reduced the amount of batteries to 20 x AA and 24 x AAA + space for 10 AA empty ones.

I also wanted to safe some PLA as I didn't need the area around my AAA to be as high as for my AA (like in the original model). And I didn't need the top lid as it was in the drawer anyways.

FACTS:
Size of the box is 13.3cm x 15.3cm x 2cm
102g of PLA

I used a 0.4n with a 0.24mm LH and 100 PS. 

Took me around 5h30min to print it.

I will share the .gcode and .slt if you want to change the model as you cannot scale it.

Please share your models and let me know your best settings :)