Groove Mount / V6 Adapter for Anycubic Kobra Max

WIP of a Korba Max mod. I abandoned it over cooling issues but the parts uploaded did fit when tested  on my machine


The long version positions a mellow v6 hotends nozzle were the stock nozzle would be.
My presliced gcode got flagged as corrupt, so I had to zip it. I dont think theres anything wrong with it but use it at your own perril.
(These settings might seem a little extreme, but you can print this with a normal 0.4 nozzle)
line width of ≤0.276
layer height of ≤0.8
exclusive slicing mode
Supports: none  needed
get it as close to 100% solid as you can with your material
Recommend: 
Have the screws bite into their slot at least once before you fully assemble.
Formfutura tough Pla,or something better
A small pipe wrench to help press the halves together
Cheap screws I used https://www.amazon.de/-/en/gp/product/B08CXDXYJY
Cheap allen keys I used https://www.amazon.de/dp/B088MDTTL4