Samsung Refrigerator French Door Mullion Hinge DA61-08305A

If you have a Samsung refrigerator with a French door, you know there's a little mullion flap between the two sides of the door that slides into place when the door closes to insulate the gap. You may have also at some point accidentally bumped this with the door open and banged the door halves together if the flap is out when you go to close the door. There's only a small hinge part holding this on, so it's easy to break. 

This is a printable replacement for that part. Recommended to print with 4-5 walls and solid infill for strength. I used ABS, but PLA+ or PETG would probably work OK. It's invisible under normal operation, so you can make it out of whatever color you have handy. 

I printed it with the spring retainer hole on the print bed (upside down from how it's installed), and used ‘normal’ (non-tree) supports.