Remixed BMW e30 m20 Holder 11141716134

Two STL one logo and one NO logo.

For logo to come out recommended a smaller nozzle and/or quality print settings.

Remix of Part Number 11141716134 To make it stronger and thinner in the engine bay. Less slop in the cable moving around.

How to print.

For engine use recommended ASA or ABS any other high heat resist material.

Print on its side with minimal supports.

Inspect regularly for warping, 3d printer parts can warp especially in the engine bay.

Crank position wire holder

OEM Part 11141716134 was found on the following vehicles:
3' E30  (01/1982 — 04/1993)
5' E28  (11/1980 — 01/1989)
5' E34  (06/1987 — 10/1990)
Z1 Roadster (07/1988 — 06/1991)

Legal Disclaimer:  

Offroad Use Only: The automotive parts provided are intended for offroad use only. It is important to note that the use of these parts on public roads may violate local regulations, laws, or safety standards. The purchaser assumes all responsibility for ensuring compliance with applicable laws and regulations regarding the use of these parts.

3D Printer Parts: The 3D printer parts provided may be subject to failure or malfunction. It is essential to recognize that 3D printed parts may not possess the same strength or durability as traditionally manufactured components. The purchaser assumes all risks associated with the use of these 3D printed parts and is encouraged to exercise caution and common sense during their utilization.

Regular Inspection: It is recommended that all parts, including automotive and 3D printer parts, be inspected regularly for any signs of wear, damage, or failure. Routine inspection ensures early detection of potential issues and helps maintain optimal performance and safety. The purchaser is responsible for conducting regular inspections and addressing any identified concerns promptly.

Assumption of Risk: The user (person whom is using this part) acknowledges and assumes all risks associated with the use of these parts, including but not limited to property damage, personal injury, or any other harm that may arise. The purchaser agrees to hold harmless the seller, manufacturer, distributors, and any associated parties from any claims, damages, or liabilities related to the use of these parts.

By using these automotive and 3D printer parts, you indicate your understanding and acceptance of the terms and conditions stated in this legal disclaimer. If you do not agree with any part of this disclaimer, you should refrain from using these parts.