Universal Drainer (V3) (Cutlery, Sponge, Soap)

Drain your cutlery, sponge, soap, and other possibilities with the same base drainer! Swap out the top tray and you are able to hold different items!

If you look at the photo of the drainer top view and notice the layer lines, the lowest point of the drainer basin is precisely at the hole for water to drain out.

This is remixed from my earlier drainer design to hold a cutlery basket design from https://www.thingiverse.com/thing:3606705 and I have kept to that dimensions for interchangeability. 

Some minor changes to reduce the height and remove the middle support for the cutlery basket. (That part is heavy!)

I have included some options to suit your needs. 

• Cutlery basket - take from https://www.thingiverse.com/thing:3606705
• Sponge tray - A and B are almost identical, except that B has more partitions for thinner sponges.
• Soap tray - Choose the size and orientation of the drainer and tray type to suit your needs.

I will add more options in the future, everyone is welcome to design their own trays/holders! (160x120mm or 80x120mm with a 15mm radius on all corners) Please share your designs by adding a comment with your link!

Is there a need for a bigger drainer for plates? Let me know!

*****

Want to buy me a coffee?
https://www.buymeacoffee.com/zer0s 

Clicking on my affiliate links below will give me a small kickback if you purchase something. (at no extra cost to you) 

AliExpress affiliate link:
https://s.click.aliexpress.com/e/_DmpFxU1

*****

Consolidated affiliate links of other 3D printing-related items:
https://wp.me/peMLu6-j

For Amazon affiliate links
https://wp.me/peMLu6-2C