Raspberry Pi 4B case

This was designed for a raspberry pi 4b using both a heatsink and stock fan. My purpose for this design was to use my Rpi to run octoprint, and to be able to mount this to my Ender 3 Pro, but the case and mount are separate for easy removal or for al alternate use.

It is a two piece design that is held together with four 6x3mm magnets. There are ports for all cables and a side slot for a camera ribbon cable to exit.

There are also files for simple brackets for either holding the Rpi on a standard 40mm extrusion or upright free-standing (these both just slot into the vent holes).

All of my designs are unpaid passion projects that I choose to share, and I provide mesh models for free, but if you'd like to support me and my work, donations are greatly appreciated.

Category: Electronics