May 17, 2023
Description
This is a custom Hex wrench stand for Beta tools - Holds 7 Wrenches: 8mm, 6mm, 5mm, 4mm, 3mm, 2.5mm, 2mm
Rafts:
No
Supports:
No
Infill:
50%
Filament:
esun PLA
Notes:
This is a long print and had to be printed diagonally in my case. There are some built in adhesion tabs that need to be trimmed post printing. If you have a larger print bed additional adhesion such as a brim is recommended.
This print is prone to warping as the large print cools, which can detach it from the bed in some instances, keep room temp stable and ensure printer well configured.License:
Creative Commons — Attribution
9
IsTim
