Pantry Can Organizer

This handy organizer holds the standard soup cans that measure 4 3/8" (113mm) by 3" (75mm). Each assembled organizer holds 11 cans.

Use the different connector types to form a stackable version if your shelving has extra space.

Fully assembled print requires the following.

• Frame Left 1
• Frame Left 2
• Frame Left 3
• Frame Right 1
• Frame Right 2
• Frame Right 3

Connectors that are needed for the non-stackable unit.

• L Connector - 125mm x 4
• L Connector - 50mm x 12

Connectors that are needed for the stackable unit.

• Base Unit - Stackable
  • 8 x L Connector - 50mm
  • 2 x L Connector - 125mm
  • 4 x T Connector - 50mm
  • 2 x T Connector - 125mm
• Additional Units - Stackable.
  • 4 x L Connector - 50mm
  • 4 x T Connector - 50mm
  • 1 x Top Front Connector - 125mm
  • 1 x T Connector - 125mm

Use the T Connectors on the top of the assembly instead of the L Connectors to stack the units.

Units can be assembled with all T-Connectors if you wish to connect units in horizontal and vertical directions, making an entire organization system for many types of canned products. Using various connectors, the frames can be assembled in many different configurations.

Connectors can be glued using CA glue or other types of glue.

The design file is included for those who wish to modify the model for other sizes.

Printed with the following settings

• Frames
  • 10% Infill
  • 0.3 Layer Height
• Connectors
  • 15% Infill
  • 0.3 Layer Height

Version 2 has additional supports to make the frame more rigid and a taller stop to keep the cans from being pushed out as easily.