M34 Grenade prop

My friend wanted a prop of M34 smoke grenade for his airsoft team.
Our other friend Flayerz modeled the body of the grenade. https://www.thingiverse.com/flayerz/
The fuse and lever was taken from M18 smoke grenade model at Thingiverse (https://www.thingiverse.com/thing:3827660) with my modifications for better fit and easier print. Thanks to this model, you can insert a spring (from ballpoint) and really let the lever jump off the fuse.

You will need a little bit of glue to attach everything together. Also maybe tinker with size of "fuse pin" and "fuse ring" to compensate material shrink.

Crosslink to Thingiverse: https://www.thingiverse.com/thing:4680420

Print instructions

You can use my 3mf files for basic settings and just change filament and printer as you want.

I suggest printing in PETG as it is a little bit more flexible (you won't break the lever) and you can sand it if needed.

M34_Grenade - main body. Print upside down for bigger surface. No need for supports

M34_Lever - already has built in supports which you can remove manualy and then sand the surface if you want.

M34_Fuse - Supports from build plate only

M34_pin and M34_ring - simple shapes, maybe play a little bit with size (a few % up or down) for better fit inside main body and fuse.

I printed it with NEBULA PETG in White and Iron gray colors.