Screw attached Knob. A Handle designed for Resin Printers, Anycubic Photon M3

A knob designed for the cover of resin printers, but it can probably be used for a lot more. Designed so that your dirty gloves do not touch the surface of the cover as for classic handle designs.

Designed to be mounted onto the 40x40mm sticker on top of the Anycubic Photon series (M3 and probably a lot more) and wash and cure. The base itself is 39x39mm².

There is one version to be glued and one that uses M3 screws. To use M3 countersunk screws a plate can be mounted on the inside, so that the forces distribute.