MFR - 3 inch FPV Racer - Carbon frame version

It's an open source design.

Videos: https://youtube.com/playlist?list=PLgceMsQyNMfT9rvlGa_Ch6L50eUYFBX7_

Git reposistory: https://github.com/alessandroame/MFR

3d printed frame version:  https://www.printables.com/model/415322

It designed to host a 25*25 AIO board and caddx vista vtx.

If you will to use analog vtx or other digital system you just have to worry about making an adapter that has the external dimensions of caddx vista.

I printed the frame in polycarbonate and also petg and it can handle hard crashes but not on hard surfaces like concrete.

The electronic parts are well protected by the tpu canopy and the tpu support.

Hardware you need:

• 4x M2x12 screws to mount the electronics
• 4X M2 nuts
• 16x M2x6 screws for the motors

My configuration:

• Motors: T-Motor F1507 3800kv
• FC and ESC: MAMBA AIO F722 MK1 35A
• Vtx: Caddx Vista
• Camera: Caddx Nebula Pro
• Battery: 4s 850mAh

All parts are to print in TPU 95A