Bulbasaur Tree (Organic Supports)

Plant a tree in your Bulbasaur planter. Just glue the tree to the planter (but it still holds without glue - don't move it too much then). 

You can find the planter here: https://www.printables.com/de/model/106085-cute-pokemon-bulbasaur-bisasam-planter The tree has the correct size if you have printed the planter at 100%.

The cylinder helps with the orientation of the tree afterwards. I do feel like that the tree has a “Schokoladenseite” but try to translate that one into English… good luck ;)

Settings I used:

Layers and perimeters
Perimeters: 1
Solid layers (Top/Bottom): 0

Infill
Fill density: 5%
Fill pattern: Rectilinear

Support material
First layer density: 100%
First layer expansion: 20mm
Style: Organic

Advanced (Extrusion width)
Support material: make it thicker (I set it to 0.45mm)

Optional: You can play with the tree support angles and diameters in the slicer to get an individual look

More information: