June 16, 2023
Description
This is built from scratch in fusion 360 but inspired from the model linked in the remix so it looks similar. The reason for remixing was to add a angled fixing hole top increase stability when mounted and to dimension this for wire which is typical size for where I live.
This insulator nails or screws into the top of a fence post and keeps a “hot” top wire from touching any of the fence posts and creating an electrical short. Designed for 3mm diameter wire but will work for anything of less diameter also.
| Print Settings | Setting |
| Walls | 2+ |
| Layer Height | 0.2mm |
| Nozzle | 0.4mm |
| Material | Asa - anything else also works but it wont last as long outside |
| Infill | 15% |
| Supports | None |
| Other | If you have lots of tension on the wires increase the # of walls |
License:
Creative Commons — Attribution
3DJourney
