Universal handle bar clamp bracket for 22.2mm

A simple handle clamp type bracket for motorcycle 22.2mm (7/8 inch) bars. I personally use it to fix the brake fluid reservoir. but can be used for other purposes.

It needs following items

• M5x8 or 10 hex bolts: 2pcs
• M5 short thread insert: 2pcs
• 2x12 cylindrical pin (dowel pin): 1pc
• + any fasteners for what you want to fix

To print it, only the hinge part needs support (please see the picture).

To assemble the pin, you may need to drill the hole. In my case, luckily I didn't need it. I used a needle nose pliers to apply some force to press it in. I printed it in Extrudr GreenTEC Pro Carbon.

At the moment, I only uploaded a short bracket for M6 hex nut (what you can see in the picture, for front brake fluid reservoir), but I will make some other variations.