This model can be used for mounting an Arzopa 144Hz portable monitor to a regular camera tripod with a ¼" screw.
Required materials:
- Two M4x8 screws (non-countersunk)
- Two M4 nuts
- One UNC ¼" - 20 nut
Assembly:
- Slot in the M4 nuts into the corners
- Slot in the UNC ¼" nut into the center slot
- Join the two printed pieces together and thread the M4x8 screws so they grasp the M4 nuts on the other side, don't tighten all the way yet
- Sandwich the monitor in between the printed pieces, tighten the M4 screws.
License:
Creative Commons — Attribution
FruitieX
