Garmin Fenix 5 Plus, Fenix 5s, Fenix 6 and Fenix 6s quick and easy Bike Mount

I couldn't find an easy and quick Bike Mount for the Garmine Fenix 5 Plus like the Quick Release Mount for the Forerunner 935. So I deceided to design one.

I have 8 designs:

• the first for F5P and the Quick Release Mount plate from the FR935 ("GarminF5PMount-QRM.stl")
• the second for mounting the F5P on the handlebar (diameter ~25mm "GarminF5PMount_Handlebar.stl" with 5x1,5mm holes for cable ties)
• the third for mounting the F5P on the handlebar stem (diameter ~32mm "GarminF5PMount-HandlebarStem.stl" with 5x1,5mm holes for cable ties)
• the fourth for the F5s and the Quick Release Mount ("GarminFenix5s_QRM.stl")
• the fifth for mounting the F5s on the handlebar (diameter ~25mm "GarminFenix5s_Handlebar.stl" with 5x1,5mm holes for cable ties)
• the sixth for mounting the F6 on the Quick Release Mount

("Garmin_Fenix_6_QRM.stl")

• the seventh for the F6s and the Quick Release Mount ("GarminFenix6s_QRM_combined_v3.stl")
• the eighth for mounting the F6s on the handlebar (diameter ~25mm "GarminFenix6s_HBM_v3.stl" with 5x1,5mm holes for cable ties)

Many thanks to Sabrina (F5s), zenrke (F6) and karstendilz (F6s) for assisting in designing the mount.

For the QRM version I used https://www.thingiverse.com/thing:1801904 thanks @txoof

I've only tested it with the Fenix 5 Plus but it should work for the Fenix 5 as well :)

update 200912: added the mounts for Fenix 5s and Fenix 6

update 201124: added the mounts for Fenix 6s

update 220221: replaced the Fenix6HBM with the Fenix6QRM

Print Settings

Rafts:

No

Supports:

Resolution:

0.2mm

Infill:

Notes:

For strength reason it is HIGHLY RECOMMENDED to print it LAYING ON THE SIDE (like the blue thingy-picture) - otherwise you might loose/damage your watch if the bracet breaks.

4 wall lines should do.

Support is only needed for the Garmin Quick Release Mount version (the stl files with QRM in the name)

PETEG recommended but works flawlessly in PLA

Category: Sport & Outdoors