Creality Sonic Pad Upper Extrusion Mount

Free up workbench space and move your Creality Sonic Pad to the top of your printer. This was designed for the Creality CR6SE, but should work with any printer that has an open 20mm wide (2020) extrusion for the top rail.

Print Settings

Printer Brand:

Creality

Printer: 

CR-6 SE

Rafts:

No

Supports: 

No

Resolution:

0.2mm

Infill: 

20%

Filament: Polymaker PLA Pro Black

Notes:

I printed this with a 0.6mm nozzle at 0.2mm layer height. Supports and/or a brim should not be necessary.

You will need two M3x12 screws to attach the mount to the Sonic Pad and two M5x12 screws and T-Nuts to attach the mount to the top rail. In the case of the CR6SE, you can reuse the M5 hardware from the carrying handle.

Note: If your screen appears upside down, you can rotate it 180* under the Sonic Pad's settings menu.

Category: 3D Printer Parts