Panasonic JU-256 Floppy Drive Button Extension - For Amiga 1200 Case

Introduction

This is a simple design to fit over the top of the existing eject button on a Panasonic JU-256 floppy drive to enable it to work as an internal drive on an Amiga 1200 case. 

This is part of a larger project: https://www.printables.com/model/419333-amiga-1200-raspberry-pi-non-destructive-case-brack/files

Print settings

• Material = PLA
• Layer height = 0.2mm
• No supports required
• 15% infill