button box shifter holder for playseat challenge

i made this button box to get a bunch of buttons close to my wheel.

the holder is mounted with 2 pipe clamps - m3 screws - m3 threaded inserts and does not move at all.

the holes are 3cm for the big shifter and 7mm for the buttons.

also holes for a zero delay arcarde encoder are prepared so everything just need to be connected and plugged into the pc.

parts i used:

clamps: https://www.hornbach.de/p/rohrschelle-23-mm-fuer-3-4-zoll-galv-verzinkt-dickschichtpassiviert/3375562/

threaded inserts: https://www.prusa3d.com/de/produkt/gewindeeinsatze-m3-standard-100-stuck/

shifter: www.amazon.de/HKA1-41Z02-Joystick-Schalter-1-Stück-mit-2-Positionen/dp/B07GGNY75G/

buttons: https://www.amazon.de/Momentary-Vorgelöteter-Druckknopfschalter-Drucktasten-Lewttyer®/dp/B09P6VTH3J/

encoder:https://www.amazon.de/EG-STARTS-Verzögerung-Controller-Drucktasten/dp/B01N94HGNG/