Phrozen Transform 5" LCD Mount (+ Extras)

Converted my Transform to a 13.6" 7K Mono LCD, Vlare control board and 5" touch screen provided by Duobond. These files allow you to mount the new (optional) 5" screen through the existing opening and require no cutting or drilling. I have included two versions, one with a built in visor to protect from drips, one without. Designed to be bolted together with the flange piece on the inside and using four M4x10 bolts with the nuts pressed into the screen mount. The screen can then have the cable attached and be mounted in the frame with the double sided tape provided.

While the cable bend required isn't ideal, this was still a working solution before I decided whether I wanted to trim the opening and mount the screen inside as per the original. I mounted the control board in the stock location and required a 500mm long cable to comfortably reach.

Also included are some optional files-
- Visors (both a version to be mounted with double sided tape and one to take 8x3mm round magnets for easy removal. 
- Blanking plates for the stock control board ports in the back of the case (also a second version with a hole to feed a USB C cable through)
- Build chamber vent blank (using M4 nuts pressed in for the magnets to hold down)
- Mintion UV sensor mount (over the chamber vent) to make use of the Beaglecam for time lapse videos

All parts designed to be printed on my FDM printer and are oriented accordingly. I have not tested these with resin and printer tolerances may vary. I can edit files where required if requested.