Mazda B-Series wheel hub cap

I bought some nice Dotz rims for my Mazda B2500. Unfortunately the wheel hub caps are not just very expensive but the look also very ugly (in my opinion).
So what's the solution for a tinkerer like me? I designed my own ones to fit my needs! :D

The caps are meant to be printed upside down to have a nice surface without the typical 3D printed surface. I recommend to use PETG on a textured sheet.

The caps are hold in place by the wheel nuts so you need to demount them to put them onto your rims.

As seen on the pictures I Printed the clean looking Version 1 and modified it with a Mazda logo from ToxicMaxi (https://www.printables.com/model/385910-mazda-logo), but you can modify them with any other logo of your choice to personalize your car :) 
The Logo is three layers thick (0,6mm). You can either print it with your MMU2S or you you program a manual material change with the command M601.
Feel free to contact me in the comments if you have any trouble with modifying your print program to create a multi color print.

The V2 files are upgraded to minimize overhangs and eliminate the need to print with overhangs.

UPDATE 28.11.23 Added a version for 5 bolt rims!

Please share your prints and show me your modifications and personalized rims!

HAVE FUN AND HAPPY PRINTING!