July 6, 2023
Description
Sv06+ Plus Vortex fan with mounting bracket.
Printed with PETG 0.2mm line height, supports as needed.
Hardware: M3 x 25 tapered for mounting to gantry. used tapered head for this so the hardware doesn't interfere with X-axis calibration. x2
M3 x 25 screws with M3 nut and locking washers for the mounting the pieces together and fan. Recommend putting the nuts on the left side so it doesn't hit during calibration. x3
While mounting make sure to adjust the ducts so they are higher than the tip of the nozzle so that the ducts dont hit the printed parts.
License:
Creative Commons — Attribution
7
FingWizard
