December 15, 2020
Description
I cleaned up a set of old Christmas baubles and have derived some new things from it. This is one of the newer baubles and I test printed it with a 0.8mm nozzle. The original file is a bit harder to print (because of the top) but I've also added a version that prints more easy. You might consider to play a bit with the layer height for the bottom overhang to make it print even more easily but it might work without, too.
If you like this little thing, you might want to look at those, too:
https://www.prusaprinters.org/social/3373-wilko/collections/37573
Printer Brand:
Prusa
Printer:
i3 MK3
</div>Rafts:No
Supports:
No
</div>Resolution:0.6
Infill:
0%
</div>Notes:
I've used a 0.8mm nozzle in this configuration, but it should work with smaller nozzles just fine.
License:
Creative Commons — Attribution
9
Wilko
