Safety power off switch - Ein Aus Schalter Maschinenschalter

I have created a adapter for a power switch, to add the off plate  to it, because the price deference was substantial.

I made the design for easy printing in mind (quick 1hr for all parts, no support), hence 3 parts, that you can print and assemble easily.

1. you can use glue or a screw to connect the adapter to the power switch
2. the off extension of the plate,  would require to be glued on the back of the plate (aligned to the off switch bottom)
3. the Off plate just snaps in the base, no need for any extra parts.

this is the cheapest switch I could order on amazon: power switch.

I printed the adapter in PETG black (to be more rigid) and  the off plate switch in PLA red / white.
basically you can use any combination.

you can use glue or a screw to connect the adapter to the power switch.