Modular magnetic cable organiser

Simple modular organiser to keep your cables tidy. Can be customised to hold any number of cables just by adding more dock pieces.

Mounts come in two sizes (small = 3.2 mm, big = 5.5 mm) to suit a variety of cables. The larger size is easier to assemble and will still hold any cable however.

Parts to print:

- Dock pieces - 1x left + 1x right + as many center pieces as you need

- Cable mount - 1x bottom piece + 1x top piece

Parts needed:

- Magnets - 4x magnets (6 x 3 mm) per cable

- Super glue - to stick the magnets in place

- Double-sided tape - to stick the dock down

Notes:

- The dock pieces are intentionally designed with tight tolerances to keep them together. They should snap together with a satisfying click

- The magnet holes are not designed to be press fit, but this may work depending on your print tolerance

- Double check your magnet polarity before you stick them down! If you get this wrong, you can use a small flat head screwdriver in the slopes adjacent to the magnet holes to pry them back out

Requests:

- Feel free to request designs for different magnet sizes or cable thicknesses. I used 6 x 3 mm magnets because I had plenty of spares from other projects