Death Star Boxes With Pedestals Collection

I created a Death Star Boxes With Pedestals for different purposes for everyone, who love Star Wars, Death Star and need boxes :-)

I took and remodeled two original models by tato_713 and Synth3D from Printables and made it into a simple Death Star Boxes With Pedestals for different purposes.

I did 3 versions (models) in accurate size scaled by first Death Star (Diameter 120km): 

1. Death Star (Ring I Jewelery) Box With Pedestal 1-2 000 000 size (5x1,5mm magnets) - Death Star Box With Pedestal in scale 1-2 000 000 with two 5x1,5mm magnets for magnetic lock, the best fit for rings, jewelry or small personal items.
2. Death Star (Universal) Box With Pedestal 1-1 000 000 size (10x3mm magnets) - Death Star Box With Pedestal in scale 1-1 000 000 with two 10x3mm magnets for magnetic lock is universal, the best fit for middle personal items.
3. Death Star (Cookies I Big) Box With Pedestal 1- 500 000 size (20x6mm magnets) -Death Star Box With Pedestal in scale 1-500 000 with two 20x6mm magnets for magnetic lock, the best fit big personal items and Cookies, because The Empire have cookies!

Common features:

• Models are designed for two round 5x1,5mm / 10x3mm / 20x6mm magnets. I recomend a neodymium magnets. I used in my print and work excellently. You must to use glue and glued one magnet to “Top” part and one magnet to “Bottom” part. 
• I did two pins with different dimensions of diameter to every type of model. You can chose, whitch is better for Your final print according to printing deviations on Your 3D printers. I used in my print narrower pin. I strongly recommend to check the area around the pins to see if it is smooth. And if not, use sandpaper or a dremel to smooth the surface of the pins and areas of "Pin lock" on the “Top” part and "Bottom" part.
• If the pin will fall out, carefully use a little glue on the left and right sides of the pin and "Pin lock" on the "Top" part
• You can glued a "Pedestal" to a "Bottom" part, or not and have movable Death Star Box. It is up to You.

But if You need some different size, You can take my model “Death Star (Ring I Jewelery) Box With Pedestal 1-2 000 000 size (5x1,5mm magnets)” or “Death Star (Universal) Box With Pedestal 1-1 000 000 size (10x3mm magnets)” or “Death Star (Cookies I Big) Box With Pedestal 1- 500 000 size (20x6mm magnets)” and resize it.

Personally I printed a Death Star (Ring I Jewelery) Box With Pedestal 1-2 000 000 size (5x1,5mm magnets) and work perfectly.

I hope You like it :-D

Print settings

Printer Brand:
Prusa

Printers:
i3 MK3S+

Rafts:
No

Supports:
Yes

Distinction:
0.10 - 0.20

Filling:
15 - 50 %

Thread Brand:
Prusa

Thread color:
I prefer Silver and Black

Fiber material:
PLA