July 24, 2024
Description
I recreated these mudguards based off a set I purchased, with some small tweaks and added Arrma branding. The Arrma ‘RR’ model was borrowed from https://www.printables.com/model/114281-arrma-logo-multicolor
You will require 6 screws to fasten these to your rear control arms.
I initially printed these with PLA+ but rocks will eventually smash through. TPU is all I can recommend, they will last forever.
Print with 40% infill in TPU.
License:
Creative Commons — Attribution — Noncommercial
9
Geddysburg
