Kitchen scale holder - Kitchen organizer

A simple model to hang your kitchen scale in your cabinet and out of the way. Can be hanged with screws or double sided tape. 

SCALE TO FIT YOUR NEEDS:

If you want other measurements, simply scale the model in the slicer using the following formulas that account for the wall thickness:

X-axis: #YOUR_SCALE_WIDTH + 7

Y-axis: #YOUR_SCALE_LENGTH

Z-axis: #YOUR_SCALE_HEIGHT + 3.85

You might want to add some mm of clearance on all axis (espescially if you're increasing the size)

Version 2:

No screw holes in order to print easier if they are not needed. Printed with supports on buildplate only. 

Also created a version without the middle support section so that is suits any width. Prints best as is, with supports in the bend. Thanks for the tip @LenaEinmal_1150314