Africa puzzle

Africa puzzle

Each part has its German name 3D extruded onto it. It's roughly 45x50cm big. I included the source file into it, so you can remix it, in your respective language!

Print Advice

Print some test pieces and see how they fit together. On my photo you can see, that my fit wasn't always the best (explicit South Africa and its neighbours). Use your slicer to offset the XY-geometry (0.2 mm should be a good start).

Some pieces are pretty small. A slicer with Arachne is recommended (PrusaSlicer / Cura). For some pieces, a smaller nozzle might be better.

Disclaimer

I don't want to disrespect any opinions about specific borders. I understand, that it's way more complicated, I just took the borders and names from Google Maps. If you want to make it better, feel free to take my source file and remix it!